Go Power 2000 Watt Pure Sine Wave Inverter/ 100 Amp Charger GP-IC-2000

Go Power 2000 Watt Pure Sine Wave Inverter/ 100 Amp Charger GP-IC-2000

Availability: In stock

$1,231.99

GP-IC-2000-12

Quick Overview

OR

Details

The Go Power! Inverter Charger is a breakthrough product where you get top features, quality, and performance at an economical price. The inverter charger is a 3-in-1 system combining an inverter, battery charger and automatic transfer switch. This saves space and simplifies installation by reducing the number of devices and cables to install.

While most inverter chargers offer a 30 amp transfer switch, the IC2000 provides two 50 amp legs. That means when connected to shore power 50 amp service (240V), you can draw up to 12,000 watts of power! The IC2000 is also compatible with 30 amp service.

The IC2000 Includes a battery temperature sensor on a 25′ cable. One end mounts onto your battery and the other end plugs into the inverter charger. The temperature data is sent to the IC2000 which automatically adjusts voltage to maintain proper and healthy charging.

Accessorize with the IC Series digital remote panel for complete control and monitoring of your inverter charger!

For product support and troubleshooting videos, click here.

Features

  • 2000 watt pure sine wave inverter; 3400 watt surge (5 seconds)
  • High inverter efficiency – 90%
  • 100 amp battery converter/charger
  • 100 amp automatic transfer switch (50 amps per leg at 110V AC)
  • Built-in handles offers easier handling during installation
  • Power factor corrected
  • Industry standard protection features
  • Meets UL 1741 and UL 458 with marine supplement
  • 3 year warranty

Inverter Specifications

Output Power (up to 40ºC) 2000W
Surge Power (100 milliseconds) 4000W
Surge Power (5 seconds) 3400W
Peak Output Current 35A
Continuous Output Current 17A
Output Voltage 115 VAC
Output Frequency 60 Hz ±0.1Hz
Output Waveform Pure Sine Wave
Efficiency (Peak) 90%
DC Input Voltage Range 9 – 17 VDC
Maximum Continuous DC Input Current 283 ADC
No Load Power Consumption Normal Mode:25W, Sleep Mode: 5W
AC Connections Split Phase In/Dual Out, Dual In/ Dual Out

Charger Specifications

Input Voltage Nominal 120 VAC
Input Voltage Range 80 – 140VAC
Input Current 15A
Input Power Factor Correction 0.97 typical
Optimal Efficiency > 85%
Charge Control 3 stage with manual equalize
Output Voltage 5 – 16VDC
Output Current 100 ADC
Change Temperature Compensation Remote Battery Sensor

Transfer Relay Specifications

Transfer Time 16ms
Transfer Relay Rating 2 legs at 50A each (240V split-phase)

Additional Specifications

Temperature -20˚C to 60˚C, (Over 40˚C output derates)
Humidity 0 to 95% RH non condensing
Dimensions (L x W x H) 13.7” x 12.6” x 8.07” (14.9” with terminals), 349 x 321 x 205 mm (378 mm with terminals)
Net Weight 38.71 lbs (17.6 kg)
Regulatory and Safety Specifications UL certified to 458 & 1741 (with Marine Supplement) and to CSA 22.2 No. 107.1-01 FCC Path 15, Class B

Additional Information

SKU GP-IC-2000-12
Input Voltage 12 Vol
Output Voltage 120 Volt
Wattage 2000-2999
Sine Wave Type Pure Sine

Be the first to review this product

Write Your Own Review

You're reviewing: Go Power 2000 Watt Pure Sine Wave Inverter/ 100 Amp Charger GP-IC-2000

close
Compliance and Restrictions

warning:  Cancer and Birth Defect/Reproductive Harm -- www.P65Warnings.ca.gov/product