Go Power! GP-PWM-30 30 Amp Solar Regulator

Go Power! GP-PWM-30 30 Amp Solar Regulator

Availability: In stock



Quick Overview



A charge controller is an essential component of your photovoltaic (PV) system. The controller maintains the life of the battery by protecting it from overcharging. When your battery has reached a 100% state of charge, the controller prevents overcharging by limiting the current flowing into the batteries from your solar array.


  • 12 volt flush mounted PV charge controller rated for a continuous solar current input of 30 amps.
  • Uses pulse width modulation (PWM) technology
  • Unique four stage charging system with optional equalize setting, to charge and protect your battery bank
  • LCD digital display that shows solar array charge current, system battery voltage and battery capacity
  • Built-in USB charge port
  • Connects up to 500 watts total
  • Charges 1 or 2 battery banks
  • Remote on/off control of Go Power! inverters* (certain models)
  • 5 year warranty

controller specifications

Nominal System Voltage 12V
Max Solar Array Current 10A
Battery Voltage Range 6V — 15.5V
Max. Solar panel input voltage 28V
Operating Consumption 6mA
Display Consumption 10mA
Temp. Compensation -13mV/ºF / – 24mV/ºC
Operating Temperature – 40 to 185ºF / – 40 to 85ºC
Humidity 99% N.C.
Dimensions (H x W x D): 3.94 x 4.02 x 1.14 in; 100 x 102 x 29 mm
Weight 6.3 oz; 178 grams
Maximum Wire Gauge: #4 AWG
Warranty 5 year
Protection Battery Reverse Polarity, Solar Array Reverse Polarity, Over temperature, Over Current

Additional Information

Manufacturer's Suggested Retail Price $155.00

Be the first to review this product

Write Your Own Review

You're reviewing: Go Power! GP-PWM-30 30 Amp Solar Regulator

Compliance and Restrictions

warning:  Cancer and Birth Defect/Reproductive Harm -- www.P65Warnings.ca.gov/product